KDM - 5' 2" Concave Lattice Top

More Views

KDM - 5' 2" Concave Lattice Top
£59.28

• Concave Lattice Top fence panel
• Double Sided Fence Panel
• Pressure treated with Green finish
• Ideal for use in Low-medium strength wind areas.

IMPORTANT NOTICE: These panels are made to a metric width of 1.8m (6' is 1.83m) so you will require panel spacers if replacing 6ft wide panels and using your existing posts or when you're installing along with 6ft wide concrete gravel boards. (Timber gravel boards can be cut to fit)

Overall height is measured to the highest point of the panel, which is 157cm. These panels are typically used with the 6' Arched Lattice top panel. to create a wave effect across the line of fencing.

* Required Fields

Description

Details

Premium quality, double sided fence panel from our continental range.

Specification
Pressure treated timber that's planed with rounded edges
Lattice: 12mm x 30mm
Gap between lattice: 50mm

IMPORTANT NOTICE: These panels are made to a metric width of 1.8m (6' is 1.83m) so you will require panel spacers if replacing 6ft wide panels and using your existing posts or when you're installing along with 6ft wide concrete gravel boards. (Timber gravel boards can be cut to fit)

Overall height is measured to the highest point of the panel, which is 157cm. These panels are typically used with the 6' Arched Lattice top panel. to create a wave effect across the line of fencing.

Pressure Treated Timber
All timber used is pressure treated to protect against rot and insect attack.There's no need to apply any treatment before fitting.

Reviews

You may also be interested in the following product(s)