Ultrascape Flowpoint Smooth is a rapid set paving grout that's ideally suited to smooth paving stones and slabs with joints as small as 3mm, providing a seamless surface to your project and can be used with natural stone, concrete flags and clay paviours.
Coverage & Application
Each 25kg bag of Flowpoint Smooth will cover approximately 7-10sq.m of paving. (Coverage varies depending on the size and depth of your joints)
Application is very simple but there are guidelines that must be followed. Details are marked on the bag or you can read the technical data sheet here.
Ultrascape Flowpoint Smooth is a fully pre-mixed dry-pack which only requires the addition of water on-site.
It can fill joints from 3mm-50mm and joint depths of up to 200mm in one pour. This highly fluid grout achieves a final compressive strength of 49.6N/ mm 2 (results achieved using 4.25 litres of water per 25kg bag), and will reach initial set in 30 minutes, will accept light foot traffic after 1 hour, and vehicular traffic after just 4 hours (dependent upon temperature).