Used to secure the bottom of a door or gate to the floor. Galvanized or Epoxy Black finish. Comes complete with all required fixings.
1. Place retainer plate into the door/gate & insert the drop bolt in the locked position.
2. Position shoot retainer plate as desired with the bottom of the drop bolt flush with the bottom of the door/gate & fix with the screws provided.
3. Slide bolt guides onto bottom of drop bolt and fasten in desired positions with screws provided. The top guide should be placed low enough to allow the bolt to drop at least 2".
4. Let bolt drop onto the floor and mark the postion where hole should be drilled. Now drill a hole large enough to accept the bolt and at least 1½ - 2" deep.
5 Fix tubular socket in hole with cement. Floor plate is also included if needed; place floor plate over hole and secure floor with screws.