Fila - Deterdek Pro Intensive Cleaner

Fila - Deterdek Pro Intensive Cleaner is a detergent that's ideal for end-of-installation washing. Removes post-application deposits and building-site dirt. Also effective at removing grout residue.

Fila - Deterdek Pro Intensive Cleaner can also be used to eliminate saline efflorescences from terracotta and limescale from floors, showers, bathroom fittings.

Thoroughly cleans outdoor floors.

Available in 2 sizes: 1 Litre (Concentrate) and 5 Litres (Concentrate).

Do not use on polished marble or on any materials that are sensitive to acids.
Before using on this material, carry out a test on a small surface area to check that it is actually resistant to the product.
For items in aluminium, follow the instructions and use a soft sponge.

---

How To Use:

Dilution: between 1:5 and 1:10 according to the level of dirt to be removed.

Application for washing after laying and for end-of-work cleaning:
Wet the surface well with water before washing. Then use Deterdek Pro diluted at a ratio of 1:5 or 1:10 (1 litre of product in 5 or 10 litres of water).
Apply the solution a few square metres at a time, then add, allow contact time of 5 minutes, then work with a single disc cleaner or large brush.
Remove any residues using a cloth or liquid vacuum cleaner and rinse with abundant water. Should any stubborn dirt residues remain, repeat the wash with more concentrated solutions.

For maintenance on outdoor surfaces with clear signs of ageing (smog, dust...):
Dilute 1 litre of product in 10 litres of water. Then follow the same application procedures described above.

---

For Use On:

Terracotta
Quarry Tiles
Porcelain Tiles
Glazed Ceramic
Acid-resistant Stone Surfaces

Do not use on polished marble or on any materials that are sensitive to acids.
Before using on this material, carry out a test on a small surface area to check that it is actually resistant to the product.
For items in aluminium, follow the instructions and use a soft sponge.

---

Product Features:

• Detergent for end-of-installation washing
• Removes post-application deposits and building-site dirt
• Eliminates saline efflorescences from terracotta
• Eliminates lime-scale from floors, showers, bathroom fittings
• Also effective at removing grout residue
• Thoroughly cleans outdoor floors
• Effective against rust stains
• Helps to remove signs of engobing on ceramic & porcelain tiles
• Contains no hydrochloric acid
• Available in 2 sizes: 1 Litre and 5 Litres
• Coverage: Up to 40m2 / 200m2