Fila - Wet (Wet-Look Protector)

Fila - Wet (Wet-Look Protector) gives wet look to untreated surfaces with tumbled, flame and natural sawn finishes. Also protects materials from water and oil.

The wet effect can be intensified with several applications.

How To Use:

Ready to use - no dilution required.

Application:
1. On a clean and dry surface, apply one even and continuous coat of Fila - Wet with a brush
2. After 24 hours repeat treatment in the same way
3. For very absorbent materials, a third coat may be required to reach the desired wet effect

Maintenance:
In the areas most exposed to weather conditions we recommend applying the product again every two years.

For Use On:

Unfinished Marble & Granite
Unpolished Natural Stone & Agglomerates
Tuff

PLEASE NOTE: Do not apply the product externally if rain is forecast during the following 24 hours
Do not walk on floor while it's drying: wait 24 hours after last product application
Do not apply on terracotta floors or polished/very smooth surfaces
If product has been wrongly applied or if a thorough cleaning is required, remove WET using NOPAINT STAR
The product cannot be applied on supports subject to rising damp and in damp environments where water tends to stagnate (showers, saunas, Turkish baths, etc.)
The product cannot be applied to supports with problems connected with rising damp

Product Features:

• Gives wet look to untreated surfaces
• Suitable for use with tumbled, flame & natural sawn finishes
• Protects material from water and oil
• Consolidating effect treatment
• Does not yellow with age
• Does not scrape from surface once applied
• Available in a 1 Litre or 5 Litre bottle